Hello Guest it is August 17, 2019, 02:13:15 PM

Author Topic: Feedrate really slow when running a line with G43  (Read 5199 times)

0 Members and 1 Guest are viewing this topic.

Offline mhdale

*
  •  130 130
  • Knowledge is the Treasure.
    • View Profile
    • Black Dragon Technologies
Re: Feedrate really slow when running a line with G43
« Reply #10 on: September 06, 2006, 06:50:51 PM »
Brian I have tried everything I can think off and I cant seem to find what is causing it to feed so slowly at the beginning of the program.. It allways uses a feedrate of 8 and no watter what I do I cant seem to change it. It is doing it on all of the files now, and I know it wasn't before.....Obviously I have changed some setting.....but I cant find it...and it's weird, It rapids to Safe Z Above the start and then uses this glacial pace to drop down to the First Start point at which time everything picks up and runs normal.... I have a 12" Z so it's getting kinda annoying.. any suggestion on where this feedrate might be set?

Mike

Re: Feedrate really slow when running a line with G43
« Reply #11 on: September 12, 2006, 10:28:15 AM »
Mike please send me your XML and I will see what I can do ...
Thanks
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com