Hello Guest it is November 19, 2019, 11:31:08 PM

Author Topic: Tool setter  (Read 9926 times)

0 Members and 1 Guest are viewing this topic.

Offline Sam

*
  • *
  •  988 988
    • View Profile
    • hillbillyhilton.com
Tool setter
« on: September 13, 2009, 11:51:41 PM »
Still needs wired.
"CONFIDENCE: it's the feeling you experience before you fully understand the situation."

Offline Tweakie.CNC

*
  • *
  •  8,003 8,003
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Tool setter
« Reply #1 on: September 14, 2009, 07:19:47 AM »
Very nice Sam.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline Sam

*
  • *
  •  988 988
    • View Profile
    • hillbillyhilton.com
Re: Tool setter
« Reply #2 on: September 14, 2009, 08:10:07 PM »
Thanks Tweakie. Had to anodize it just for the heck of it.
"CONFIDENCE: it's the feeling you experience before you fully understand the situation."

Offline Chaoticone

*
  • *
  •  5,628 5,628
  • Precision Chaos
    • View Profile
Re: Tool setter
« Reply #3 on: September 14, 2009, 09:16:51 PM »
Looks real good Sam.

Is that my glass?

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Tool setter
« Reply #4 on: September 14, 2009, 09:52:30 PM »
Hi, did you anodize it yourself, if yes, would be interesting to know how you did it.

BTW, really nice job.

Jeff

Offline Sam

*
  • *
  •  988 988
    • View Profile
    • hillbillyhilton.com
Re: Tool setter
« Reply #5 on: September 14, 2009, 10:47:44 PM »
It does kinda look like it, Brett, but it says "Jack Daniels", not "kool-aid" :)

Yes, I anodized it myself. Thanks for the compliment. I'm afraid the scope of the process goes beyond a simple quick answer. I can refer you to a website that might answer any questions you have, if your really interested. http://caswellplating.com/ . Although I have not used their kits, they do have a free forum with people eager to answer questions and help out.
"CONFIDENCE: it's the feeling you experience before you fully understand the situation."

Offline Tweakie.CNC

*
  • *
  •  8,003 8,003
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Tool setter
« Reply #6 on: September 15, 2009, 02:27:19 AM »
As always, a nice job Sam.

You could, of course, go the whole hog and put poker dots on the other 4 sides. Now that would make it  look pretty.  ;D

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline Sam

*
  • *
  •  988 988
    • View Profile
    • hillbillyhilton.com
Re: Tool setter
« Reply #7 on: September 15, 2009, 02:45:10 AM »
That's not a half bad idea.
"CONFIDENCE: it's the feeling you experience before you fully understand the situation."
Re: Tool setter
« Reply #8 on: September 15, 2009, 08:02:57 AM »
Quote
It does kinda look like it, Brett, but it says "Jack Daniels", not "kool-aid"
.....and a Sippy Cup usually has handles. ;D

or...anything with a NIPPLE on it would do nicely.  ::) ;)

RC :)
« Last Edit: September 15, 2009, 10:11:25 AM by Overloaded »
Re: Tool setter
« Reply #9 on: September 15, 2009, 08:13:39 AM »
Hi Sam,
  Do you just anodize for yourself ? Or do you do it for others as well ?   
What are your capabilities.....Colors ? Max size ?
Seems like the the larger plating outfits  don't cater to the small guy with just a couple of pieces.

Oh, dots would be nice on the cube, maybe use a ball endmill and make it look like a DICE.

Thanks,
rc