Hello Guest it is April 18, 2024, 12:21:13 PM
Profile Guest
« previous next »
Pages: « 1 2   Go Down

Author Topic: Gcode/post processor help G77  (Read 8322 times)

0 Members and 1 Guest are viewing this topic.

Offline M250cnc

*
  • 591 591
    • View Profile
Re: Gcode/post processor help G77
« Reply #10 on: September 17, 2009, 06:10:57 PM »
Its not in the folder of my current xml folder name ,if that makes sense, should it be ?

Phil
Logged
The Good Thing About Mach3, Is It's very Configurable

The Bad Thing About Mach3, Is It's Too Configurable

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Gcode/post processor help G77
« Reply #11 on: September 17, 2009, 06:49:43 PM »
If you have installed mach to the default location it will be in C:\Mach3\Macros\Mach3Turn
If you have a custom profile then there is a chance you didn't clone it from a turn profile and if thats the case then you will not have these macros there, just copy them over from the Turn folder.
Hood
Logged
Pages: « 1 2   Go Up
« previous next »