Hello Guest it is March 28, 2024, 10:46:35 AM

Author Topic: In-Groove™ Insert Engraving System  (Read 2930 times)

0 Members and 1 Guest are viewing this topic.

In-Groove™ Insert Engraving System
« on: July 20, 2009, 10:01:24 PM »
I just bought In-Groove Insert Engraving System. It has been used in Europe for the last 6 months and is new in the USA. It comes in 1/4" and 1/2" tool body and you just replace the inserts instead of exchanging cutters.  I'm new at this so I'll try a new type cutting tool.

http://www.amanatool.com/ingroove/

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: In-Groove™ Insert Engraving System
« Reply #1 on: July 21, 2009, 03:06:39 AM »
Looks good, please post pictures some of your work and keep us informed of how the tool performs.

Tweakie.
PEACE

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: In-Groove™ Insert Engraving System
« Reply #2 on: July 21, 2009, 09:23:48 AM »
tantrim,
Looks interesting and would like to see how they hold up.
RICH