Hello Guest it is October 18, 2019, 07:41:35 AM

Author Topic: Engineering Note for a 4 Axis G251 Controller  (Read 1725 times)

0 Members and 1 Guest are viewing this topic.

Engineering Note for a 4 Axis G251 Controller
« on: June 23, 2009, 07:49:30 AM »

Hi,

I just finished a new Engineering note EN009 that shows a System Schematic Of
a 4 Axis controller that uses the MB-02 BOB, DC-03 V3 DigiSpeed and four Gecko
G251 drives.

The Engineering note EN009 can be found at the bottom of the following page.

http://homanndesigns.com/store/index.php?main_page=product_info&products_id=59

Cheers,

Peter.
----------------------------------------------------
Homann Designs
http://www.homanndesigns.com
email: peter at homanndesigns.com