Hello Guest it is August 12, 2020, 12:03:47 AM

Author Topic: GCode Scaling in Mach3 Turn  (Read 2389 times)

0 Members and 1 Guest are viewing this topic.

GCode Scaling in Mach3 Turn
« on: April 28, 2009, 02:37:52 PM »
Hello.
I'm aware of the scaling in Mach3Mill, next to the DROs,,.  Where in Mach3Turn are they?  Or do they not exist?
If not,,, does anyone know how or where I can get some software to do this for me?
TheDude,

Offline Dan13

*
  •  1,208 1,208
    • View Profile
    • DY Engineering
Re: GCode Scaling in Mach3 Turn
« Reply #1 on: April 28, 2009, 02:56:51 PM »
Hi,

You can use G51 X--- Z--- I--- J---  - fill in the scale factors for each parameter. Use G50 to reset all scale factors to 1. Read the manual to learn more about implementing G51.

Daniel
Re: GCode Scaling in Mach3 Turn
« Reply #2 on: April 28, 2009, 03:52:23 PM »
 I must have missed it in the manual.  I will look again tonight. 

Thank you Daniel.
TheDude,