Hello Guest it is March 28, 2024, 05:30:58 PM

Author Topic: Missing Toolpath?  (Read 2937 times)

0 Members and 1 Guest are viewing this topic.

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Missing Toolpath?
« on: April 10, 2009, 12:04:52 PM »
Hi guys,

I'm making up my own lathe screen and basically what I've done is just saved my custom mill screen to an lset file because I'm used to where everything is.

Now everything seems to be working but the toolpath does not show up on 2 of my screens like it does for my mill screen set. It shows up on the MDI and the Diagnostics page, but not my Toolpath and Program Run pages. Seems very odd.... lol.

Is this a quirk with lathe screens or am I missing something?

Thanks for your time-  :)
Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: Missing Toolpath?
« Reply #1 on: April 10, 2009, 12:34:51 PM »
Nevermind, I just hamfisted my way through it and had to delete the background and put it back up again and all is fine now-

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)