Hello Guest it is March 28, 2024, 03:33:24 PM

Author Topic: edge finder  (Read 4275 times)

0 Members and 1 Guest are viewing this topic.

edge finder
« on: February 16, 2009, 06:34:56 PM »
hi
i have a edge finder i soldered a wire to and hooked to 5v then run another wire that clips to my work and is hooked to pin 12 on my bob right now i just have it set to trigger a estop when it touches how would be the correct way to hook it up and is their a plug in that i need to make it work? thanks
Re: edge finder
« Reply #1 on: February 17, 2009, 08:35:22 AM »
I don't think you want it to trigger an estop as positioning is lost when an estop is triggered. There is another pin for probing, pin 15 in my setup.
Joe
Re: edge finder
« Reply #2 on: February 17, 2009, 08:02:05 PM »
how is yours set up? do you have it as a probe on inputs and do you have any extra plugin beside just mach 3? thanks

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: edge finder
« Reply #3 on: February 17, 2009, 08:33:22 PM »
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!