Hi all,
I'd like convert my mini-mill into "dumb" CNC mill, i.e. only using for cutting same part repeatly (running same G-code),
such as 20 pcs. same parts. I intend to install an external push-button to trigger the same G-code, when I press the push-
button, CNC mill will run G-code to cut first part, and then I unload 1st finished part and load second stock material, press
the push-button again, CNC mill will cut the second part,.....etc. until finished all 20 pcs. parts.
I need some ideas.
Thanks in advance.
Richard
Canada