Hello Guest it is December 06, 2019, 05:35:13 PM

Author Topic: index pulse  (Read 2638 times)

0 Members and 1 Guest are viewing this topic.

index pulse
« on: January 28, 2009, 10:19:17 PM »
how would or is the index pulse set up on the smooth stepper.I have a cnc4pc c3 board for
the pulse.Im only going to use the pulse to trigger a stop signal for the spindle.I tried connecting a second
bob to the ss but did not get it sorted on the ports/pins stuff.I need acurate location for the stop to do
a tool change.