Hello Guest it is June 03, 2025, 01:20:18 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Roughing tool path  (Read 9541 times)

0 Members and 1 Guest are viewing this topic.

gary

*
Roughing tool path
« on: May 27, 2006, 11:01:44 AM »
Hello Brian
When importing a DXF drawing from autocad into mach3 turn is it possible to create a roughing tool path in mach3 or has this got to be added at the time of drawing.
cheers Gary
Logged

Offline Brian Barker

*
  • *
  • 3,860 3,860
Re: Roughing tool path
« Reply #1 on: May 27, 2006, 11:17:28 AM »
Not at this time :( ...
Logged
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Pages: 1   Go Up
« previous next »