My first full day with the Gecko540 and Mach3...things were great until I loaded a file with a tool change...the Z touch macro works fine UNTIL the second tool change (not the first one at the beginning of the file)...after the second plate touch off on the Z, the Z axis moves up (away from the work) and cuts air...at this point I stop the cut and try and re touch off the Z, it runs up and crashes at the top...does it every time, it is repeatable, I cannot figure out what is wrong...I made a small file with a single line, then tool change, another single line, it screws up all of the time on the second tool change (and Z touch off)...I jacked with it for several hours, cannot find anything wrong...
I have attached my xml, the macro for touch off, and a simple file that screws up on the second tool change...
I hope someone can help!