Hi guys

New to Pokeys 


Wondering if anyone has drawn up Pokeys in Eagle CAD or similar , Also possibly a gecko G320X Servo Drive  and is willing to share)))

Looked for any links specific to pokeys with Gecko  and  relays online but haven't found any. Can anyone suggest some links?


Just looking for a head-start.

Thanks Paul

What exactly do you need? PoKeys is a commercial product and the schematics is not available.

I ended up using a 50 pin plug from the library as pokeys in the diagram . Don't want the circuit diagram of Pokeys

Hasher I need same for you. I'm drawing a circuit for controlling 3 axes with pokeys56e and can't find eagle layout for put pokeys in my design.

Anybody found or draw eagle libraries for pokeys ?

Thanks a lot.
TxPtO

Polabs website; read up on the CNCAddon board.

John

mrprecise44 I can't found this information.

Yesterday, draw a Eagle Library for design own circuit qith pokeys56U.

http://blog.txpto.com/StepDir2EncAB.lbr

This is a Library for Pokeys56U Device for insert in own designs.

Bye bye.
TxPtO

txpto:

Here is the link.
http://www.poscope.com/PoKeysCNCaddon

Also, while there, you can download the pdf manual. I thought it was a pretty impressive addition to the Pokeys boards.

John