Machsupport Forum
Third party software and hardware support forums. => PoKeys => Topic started by: Hasher on March 26, 2013, 09:07:01 AM
-
Hi guys
New to Pokeys ;D
Wondering if anyone has drawn up Pokeys in Eagle CAD or similar , Also possibly a gecko G320X Servo Drive and is willing to share)))
Looked for any links specific to pokeys with Gecko and relays online but haven't found any. Can anyone suggest some links?
Just looking for a head-start.
Thanks Paul
-
What exactly do you need? PoKeys is a commercial product and the schematics is not available.
-
I ended up using a 50 pin plug from the library as pokeys in the diagram . Don't want the circuit diagram of Pokeys
-
Hasher I need same for you. I'm drawing a circuit for controlling 3 axes with pokeys56e and can't find eagle layout for put pokeys in my design.
Anybody found or draw eagle libraries for pokeys ?
Thanks a lot.
TxPtO
-
Polabs website; read up on the CNCAddon board.
John
-
mrprecise44 I can't found this information.
Yesterday, draw a Eagle Library for design own circuit qith pokeys56U.
http://blog.txpto.com/StepDir2EncAB.lbr (http://blog.txpto.com/StepDir2EncAB.lbr)
This is a Library for Pokeys56U Device for insert in own designs.
Bye bye.
TxPtO
-
txpto:
Here is the link.
http://www.poscope.com/PoKeysCNCaddon
Also, while there, you can download the pdf manual. I thought it was a pretty impressive addition to the Pokeys boards.
John