Hello Guest it is May 24, 2025, 04:52:48 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Can I run two axis with one hot key  (Read 6645 times)

0 Members and 1 Guest are viewing this topic.

Offline tbarnea

*
  • 4 4
Can I run two axis with one hot key
« on: July 21, 2007, 11:55:11 AM »
I want to move both X and Z axis at the same time when pressing on a keyboard left arrow.
I still need to be able to control each axis independly (another set of two hot keys)- so slaving is out of the question
Is this possible ?
« Last Edit: July 21, 2007, 11:57:58 AM by tbarnea »
Logged

Offline Brian Barker

*
  • *
  • 3,860 3,860
Re: Can I run two axis with one hot key
« Reply #1 on: July 22, 2007, 03:23:56 PM »
You can turn Slaving on wilth
OEM Button 357 will disable the slaving

and OEM button 358 will enable the Slaving :)

Hope that helps
Brian
Logged
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

Offline tbarnea

*
  • 4 4
Re: Can I run two axis with one hot key
« Reply #2 on: July 23, 2007, 05:09:32 AM »
Thanks Brian
Can I slave Z to A and at the same time A to Y ?
I am running a CNC foam cutter which is a 4 axis machine
I need to be ablt to run both X and Z at the same time as well as Y and A
Thanks again
Tal
Logged

Offline Brian Barker

*
  • *
  • 3,860 3,860
Re: Can I run two axis with one hot key
« Reply #3 on: July 23, 2007, 07:44:41 AM »
If you setup the slaving they should do it :)

Thanks
Brian
Logged
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

Offline Greolt

*
  • 956 956
Re: Can I run two axis with one hot key
« Reply #4 on: July 23, 2007, 09:07:02 AM »
This is a capture of a section of the Wiki that pertains to OEM buttons

Looks like you can do it no problem.

Just need to change the name of Z to A

Will that muck up your gcode?  I guess it would.

Greg
« Last Edit: July 23, 2007, 09:10:25 AM by Greolt »
Logged

Offline Brian Barker

*
  • *
  • 3,860 3,860
Re: Can I run two axis with one hot key
« Reply #5 on: July 24, 2007, 10:12:21 AM »
That should work as well :)
Logged
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Pages: 1   Go Up
« previous next »