Hello Guest it is May 08, 2025, 11:55:53 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: ModIO Power In  (Read 10907 times)

0 Members and 1 Guest are viewing this topic.

Offline HillBilly

*
  • 185 185
ModIO Power In
« on: March 06, 2007, 09:22:09 AM »
Is it OK to bypass the regulator on the ModIO and supply 5 volts regulated to the terminals ( Labeled 5 volt and ground.)?

Thanks,
Darek
Logged

Offline Peter Homann

*
  • 516 516
    • Homann Designs
Re: ModIO Power In
« Reply #1 on: March 06, 2007, 03:22:22 PM »
Hi Darek,

Yes you can supply the ModIO with aregulated 5Vd supply via the apropriate screw terminals. Just make sure you don't connect a supply via the barrel jack or the Vac screw terminals.

Cheers,

Peter.
Logged
----------------------------------------------------
Homann Designs
http://www.homanndesigns.com
email: peter at homanndesigns.com

Offline HillBilly

*
  • 185 185
Re: ModIO Power In
« Reply #2 on: March 06, 2007, 07:00:18 PM »
Hey peter,

Thanks for the affirmation! I have been using one with a cutoff USB cable for power.

Darek

Logged
Pages: 1   Go Up
« previous next »