Machsupport Forum

Third party software and hardware support forums. => Mach3 and G-Rex => Topic started by: franselferink on June 25, 2019, 06:46:27 AM

Title: shape doesnt come out exactly as designed
Post by: franselferink on June 25, 2019, 06:46:27 AM

the router accuracy  looks like this (see picture). I dont have used cutter compensation.  I use a 0.6mm router bit. As far as I know just follow the line (very basic).It turns out dramtically bad.

Title: Re: shape doesnt come out exactly as designed
Post by: TPS on June 26, 2019, 05:20:28 AM

Looks like backslash in X/Y axis

Title: Re: shape doesnt come out exactly as designed
Post by: franselferink on June 26, 2019, 01:09:43 PM

Quote from: TPS on June 26, 2019, 05:20:28 AM

Looks like backslash in X/Y axis

I have solved it, it was backslash in the y direction, the coupling to the steppermotor wasnt tight and could move about 1mm