Machsupport Forum

Mach Discussion => Mach Screens => Topic started by: ostie01 on February 05, 2011, 08:44:00 PM

Title: MachStdMill Screen CV and ES button
Post by: ostie01 on February 05, 2011, 08:44:00 PM

On the run screen, when I use exact stop in my program (G61) it's the CV button that is highlighted and when I use G64 for constant feed, that's the ES button that is highlighted.

I need to use both G64 and G61 in my program.

The code are accepted . The machine runs fine, just button that are inverted.

Jeff

Title: Re: MachStdMill Screen CV and ES button
Post by: DaveCVI on February 09, 2011, 04:57:03 PM

Jeff,
What version of MSM are you using?
I just checked and with the current version of MSM G61 gives ES and G64 gives CV and the two buttons/LEDs are not swapped.

BTW - I just happened to see your post here - the best place to get MSM questions answers is www.calypsoventures.proboards.com

Dave

Quote from: ostie01 on February 05, 2011, 08:44:00 PM

On the run screen, when I use exact stop in my program (G61) it's the CV button that is highlighted and when I use G64 for constant feed, that's the ES button that is highlighted.

I need to use both G64 and G61 in my program.

The code are accepted . The machine runs fine, just button that are inverted.

Jeff