Obviously, I don't understand this.... If I have an M01 in my code, and I turn *off* M1 Optional Stop, I expect the M01 line to be skipped, but it's not. What's the trick?
Also, if I have the following macros:
M991.m1s:
If GetOEMLED(65) = 0 Then
DoOEMButton(177)
End If
M992.m1s:
If GetOEMLED(65) = 1 Then
DoOEMButton(177)
End If
I expect the sequence:
M991
M992
M991
M992
To toggle M1 Optional Stop mode, and toggle OEM LED 65. However, M991 will SET M1 Optional Stop mode, but M992 will NOT clear it!
Regards,
Ray L.