Dennis,
The xml I posted in reply #96 works and brings up the standard lathe screen set. So if you do nothing other than just load the program posted in reply #73 it will run and the path shown is correct.
You absolutely need to have your xml correct so you know what is being portrayed is correct, and if not, you probably did a booboo in Dolphin.
I will echo again, IE; Draw in diameter, configure Dolphin for diameter, use a Dolphin diameter post, have Mach configured for diameter. Do not mix diameter with radius anywhere along the way. KISS applies
I am still waiting for my license. I requested a pp for radius and diameter but as provided they did not work for V11.
Not sure what they sent you Dennis...read on.
Hood,
Thanks for the pp mod as it worked for both of the V10 pp's for use in V11. I looked in the manual and there is not crap on what to do.
Now I want to just confrrm that they post correct pathing to have confidence in them ( so far so good
). Also got the CAD import to cam profile
creation down path, hey hey , amazing what one wrong click can do......
RICH