hi TP,
thanks for the feedback,
im aware that this strategy might be an unortodox approach
but i think it would be neat doing everything from one single platform,
no cad or cam, just mach3
sinks (and hobs) comes in hundreds of different sizes and shapes, though 90% of them are just rectanguar with fillets,
add to that hundreds of different ways a same contour/outline shape can be used/machined depending on type of installation/mounting
(different slab/counter thickness, edge offset, edge profil,flush or positive/negative reveal/overhang etc)
thats why i would like to just load a simple outline file (preferable dxf), tap in desired offset, select edge profile (tool set), thickness etc, build the code with a button-hit
and go.
for the cut-out, i would just select the mill bit and let the wizard "loop" the toolpath to set depth (thickness),
and for the polishing, just select pos #1 polishing wheel, run one pass, if necessary, repeat or change the dia a little, then select next tool etc.
i guess such a wizard wouldnt be much more complex than the other shape/pocketing wizards,
but im no expert...