This is a first cut of my aluminum made cnc. Cut material is 1/2" thick MDF 12”x16” painted white, 1/8” HSS 2 Flute end mill 1/4" shank, 10K spindle RPM, 26”/min feed rate, approx. cut time 14min. Been the first cut I have selected slow RPM and Feed rates. I also attach picture of the cut after cleaning it up to see the results
https://youtu.be/cf5h7O-DMs4Still have a problem with my Probe and I attach some pictures of the wiring to see how its connected. The Probe it’s quite unpredictable what it will do, sometimes it will work like it should and sometimes goes up/dn by 1/2” and it stops (I test by touching the touch plate to the bit manually). Today after 3 times which were good I took a chance and let it finish with my finger on the E-Stop but it worked? Anyone has an idea where should I look for a solution? I have use this Probe setup in other machines for years and never had any problem, is it possible because now I use ESS and before I only had parallel port connection to my PC? Also now I use a laptop with windows 8.1 and before it was always a desktop with windows XP.