Yes, it is +/-10v analogue drive. That is not a problem, I will buy whatever I need to make this working.
Is it possible to configure mach3 so it works like this:
when selecting, let’s say, X axis, it sends a command of speed and direction to the drive and simultaneously activates the electromagnetic clutch of X axis, if I select Y axis it sends a command of speed and direction to the same drive and only switches from X axis em clutch to Y axis em clutch?
Is it possible that mach3 always sends speed and direction commands to the same drive regardless of which axis is selected either through jog or g-code and only thing what is changed is digital outputs to the em clutches?