Hello,
My Machine works well now, except, when homing the slaved axis.
The Y axis has a homing switch, agh Axis doesn't, when i select Ref Home the machine homes and then moves away from the switches, all seems well.
The problem is: the A axis is slightly out of sync with the Y axis, and each time i ref home the error it is out by the same amount again, its about .6mm out each time i hit ref home button.
The machine is pulley and belt driven so if i Ref home 7 or 8 time in succession, the machine jumps a tooth on the pulley.
Could the Y axis motor not be in sync with the A axis motor?
If not any ideas?
I am using a UC300 controller from cnc4you