Hi guys!
I'm a problem in my machine running in Mach4 and CSMIO-IP/A plugin.
My machine have 3 axis: X, Y and C1 (C1 = A configured in tangential mode rollup X).
Wen i do a REF all Axis, The DRO X and Y comes to zero! OK!
But the C1 Axis DRO after homing procedure shows 163 !
The CSMIO plugin is set to 0 in the option "Move axis after home" or "Ofset after Home"!
On page Homing and Limits in Mach4 also.
Can anyone help me?