1
VB and the development of wizards / Re: steps per by VisualBasic
« on: April 08, 2010, 08:04:24 AM »
Yep,
Just tested it
X = GetParam("StepsPerAxisX")
SetParam("StepsPerAxisX", X * 2)
fetches steps per for X and then doubles it
You can see the X DRO change to compensate and the motor tuning entry is changed.
Just tested it
X = GetParam("StepsPerAxisX")
SetParam("StepsPerAxisX", X * 2)
fetches steps per for X and then doubles it
You can see the X DRO change to compensate and the motor tuning entry is changed.