iHi, Today i proved the version 3.042.031 for first time, with a new program with enough interpolation line, i see with the Look Ahead of twenty no is enough for this and i see stopped and outburst frequently, i need a Look Ahead of 100 for see a fine movement. The buffer Load is 39% a 35khz of Kernel Speed.
With the version previous 3.037 i observe a fine and precise movement and the buffer Load is 19%, a 35khz of kernel Speed and Look Ahead of twenty.
Also the two versions have the following problems:
* A 60khz of kernel Speed o superior the movement of the mouse o the change of window can cause variation in the frequency of puses that originate jump and/or alarm in the axis.
* A 35khz the Feed Hold stop the axis a one distance superior which a 60khz, for example.
A 2000mm/min Feed Hold stop the axis in 4mm, this with 35khz of kernel. With 60khz of kernel
the axis stop in 2mm. the two a same aceleration.
I ran the Driver Test and was satisfactory.
I think that match3 take control of the PC almost all time, but can happen one time for day o one time for week that the window o the hardware of the PC interrupt the pulses.
this i proved with various computer that surpass the requirement minimun.
Maybe lack improve the real time software.
greeting