HELP, ALL OF THE SUDDEN NO MACH RESPONSE

[AAASIGNCOM]

HELLO, I HAD AN AUTOMATIC WINDOWS UPDATE OR A POWER SERGE AND NOW MACH IS NOT CONNECTED TO THE MACHINE. THE DRO DO NOT CHANGE  AND THE DIAG LEDs DO NOT LIGHT UP.  I HAVE PLENTY OF WORK AND THIS IS NO TIME TO MESS UP.  CAN ANYONE HELP ME. I AM IN INDIANAPOLIS, IN. USA.  IS THERE ANYONE OUT THERE I CAN CALL TO WALK ME THROUGH THE SETUP.  THANK YOU.  TONY ROGERS

[Hood]

If the DROs are not changing when you jog then its either you have a faulty keyboard, the Jog Control is switched off or you have no axis enabled.
If you attach your xml I can have a look and see if I can find an issue.
Hood

[AAASIGNCOM]

HI HOOD,  THANKS FOR LOOKING.  I AM PUPPING BOTH OF MY HAIRS OUT.  THANK YOU TONY

[AAASIGNCOM]

I HAVE 2 PCI LPT 2 & 3 PORTS THAT RUNS THE CONTROLLER. I ALSO THINK THE LPT ADRESSES CHANGED.  LAST NITE I HAD THE DROs CHANGING WITH KEYBOARD.  THIS MORNING THE DROs ARS NOT WOTKING

[Hood]

I have just tried your xml and when I jog with the keyboard the DROs change, if yours are not then it would seem to be an issue with your keyboard (assuming you are using the same xml)
Hood

[AndrewM]

Please do not type in all Caps.

Thanks

[AAASIGNCOM]

HOOD, THANK YOU FOR TAKING TIME TO REVIEW MY FILE. I DELETED EVERYTHING AND STARTED OVER WITH A MACH UPGRADE.  UNDERSTANDING THE PORT ADDRESS SYNTAX THROUGH MR OFF.  BUT I AM UP AND RUNNUNG, JUST NEED TO TUNE AND TWEEK.  THANK YOU AGAIN.  TONY IN INDIANAPOLIS, IN 46254 USA

[Hood]

Good you got it
Hood

[RICH]

AAASIGNCOM,

Good you got it

Well almost............turn the caps off please as it makes for easier reading and you won't wake the neighbors up when shouting.....
RICH