Weird stalling... :(

[FredduMoi]

Hi

I have a 4 axis TB6560 driver board and 4 motors.
The X axis has another motor slaved.
Everything works except that the Y axis is stalling horribly!
and if I remove the slaved motor from the system, every motor starts stalling.
It's the same situation if i put the slaved motor on the Y axis, then the X axis won't work.
There has been no problems with the Z axis except for when not having the slaved motor in the system.
The PC should be able to make it.. 2.8GHz Pentium 4 and a 128mb graphics ard.
The driver test came up OK.

[RICH]

Post info on the following:
-Driver board
- motor info and how wired
- power supply ...voltage  and available amps
- your XML file

RICH

[FredduMoi]

blue chinese TB6560 driver board
wiring and motors seem to be fine.. because it works with every motor except for the X or Y axis' motor when it has not got a slaved motor..if every motor is on its own then all of them except the Z axis motor stalls...
the power supply is 24v and 14A

XML: http://pastebay.com/125369

[ART]

Might be the license file.. does it your name in it?  Illegal license files can randomly screw up pulsing that way..
 If its in your name thats probably not it though..

Art

[RICH]

FredduMoi,
Busted  software and the nerve to ask for help.............
SO WHAT SAY YOU?

RICH