Mach3 application aborts when loading g-code

[Bartman10]

I am currently running version R3.042.040 of Mach3. Running the application and controlling my router with G-code generated by a template works fine. But when I try to load an external G-code file (by pushing the load G-code button) the application abnormally shuts down. Relaunching the application only works after a reboot of the PC. I already uninstalled the virus scanner thinking an incompatibility issue might be the cause, without any result. Has anybody encountered a similar problem or might have an idea where to look?

Thanks for helping me out!

[AndrewM]

Are you trying to load a GCode file from a plug and play device? (IE: Thumb drive?)

[Bartman10]

AndrewM,

Thanks for you reply. The abnormal shutdown of the application happens instantaneous after selecting the load G-code button. Clicking the load G-code button or selecting load G-code from the file menu results in an application that all of a sudden disappears from the screen. (I never get a pop-up screen which allows me to select a file). Trying to restart the application by clicking the mach3 icon has no effect. The only thing I can do is shut down the PC by pushing the on/off button of the PC. A controlled shut down of windows XP is apparently not possible after an abnormal termination of Mach3.

[AndrewM]

Try uninstalling mach3(make sure to copy any settings you want saved) and reinstalling the newest version found here:
http://www.machsupport.com/downloads.php
If you are installing the PP driver be sure to restart the PC after it installs, if you are using a external motion controller then you do not need to install that driver.

Let me know what happens.

[Bartman10]

Andrew,

Thanks for your help. I'll let you know what comes out!

Best regards,