// facing macro


'Xx.xxxx XDia NEEDED
'Zx.xxxx End Z NEEDED

'Fx.xxxx Feedrate 

'can be set in the settings page: 
'Hx.xxxx Depth of cut
'Cx.xxxx Clearance in the X
'Qx.xxxx Clearance in the Z
'Kx.xxxx ZStartpoint
'Rx.xxxx XStartpoint
'Tx.xxxx Taper in Deg


G78 X.5 Z-2 K-1 h.1 Q.05 C.025 t0 (Need Feed and Amount per pass)