Hello Guest it is September 20, 2019, 09:26:03 PM

Author Topic: X Y Position  (Read 2718 times)

0 Members and 1 Guest are viewing this topic.

Offline Al

*
  •  12 12
    • View Profile
X Y Position
« on: November 10, 2008, 02:24:51 PM »
I have drawings referencing center lines, so my drawings are both - and +  X&Y. When I import the dxf into Lazycam the drawing becomes positive X&Y only. Am I missing something in Lazycam (licensed version) to allow it to use and post - & +

Al

Do it today! Tomorrow is Unknown
Re: X Y Position
« Reply #1 on: November 10, 2008, 03:38:38 PM »
Al,
Under "Setup/Loading Options/Autoclean Setings" on the tool bar, try checking this box.
RC
« Last Edit: November 10, 2008, 03:40:25 PM by Overloaded »

Offline Al

*
  •  12 12
    • View Profile
Re: X Y Position
« Reply #2 on: November 10, 2008, 03:49:03 PM »
RC
thanks so much...I knew it would be something I overlooked

Al
Do it today! Tomorrow is Unknown
Re: X Y Position
« Reply #3 on: November 10, 2008, 04:27:19 PM »
No prob Al,
 If you do any turning, keep an eye on the LazyTurn board and pinpoint as many issues as possible for ART.
We're going to try to keep him here through the winter....he's doing great work with LT.
RC