Hello Guest it is January 23, 2020, 12:09:11 AM

Author Topic: how to paste a picture (.jpg) on the tangent corner in a new topic?  (Read 2672 times)

0 Members and 1 Guest are viewing this topic.

Offline jaja

*
  •  68 68
    • View Profile
Tryed to paste some pictures in a new topic in this section, the tangent corner.
I think it could not be done, since there is no "attach" possibility under the "additional options" button.
So what is the right way to do this?
I have a few pictures of some strange tools, from which i don't know how they could be used with my new lathe.
Perhaps someone else knows all about it.

greetings jaja

Offline RICH

*
  • *
  •  7,401 7,401
    • View Profile
Re: how to paste a picture (.jpg) on the tangent corner in a new topic?
« Reply #1 on: November 27, 2008, 11:22:37 PM »
jaja,
You can't just paste it. Clip brouse, find / select the file, and you should see it attach.
You can attach up to 4 files per post by clicking the (more attachments) next to Browse.
RICH

Offline jaja

*
  •  68 68
    • View Profile
Re: how to paste a picture (.jpg) on the tangent corner in a new topic?
« Reply #2 on: November 28, 2008, 08:33:45 AM »
hello Rich,

thanks for your answer
yesterday there was no "attach" screen and a possibility to browse to a folder, under the additional options in the tangent corner.
i saw it under several other topics, but not under the "tangent corner"
some setting in my computer/ firewall or something like that, i suppose
thanks, now i can post my pictures of strange lathe parts.
jaja