Hello Guest it is March 29, 2024, 11:58:28 AM

Author Topic: modbus schematic or similar  (Read 3491 times)

0 Members and 1 Guest are viewing this topic.

Offline nik

*
  •  69 69
    • View Profile
modbus schematic or similar
« on: November 11, 2008, 07:06:57 PM »
hello
Is there free or open source working schematic and firmware for Input/Output expansion board for mach3? I need more inputs on usb or serial port will be perfect
thanks
Re: modbus schematic or similar
« Reply #1 on: November 12, 2008, 12:34:56 AM »
You can start with this:
http://www.machsupport.com/forum/index.php/board,79.0.html

or a cubloc micro through modbus:
http://www.cubloc.com/product/01_01.php

I use a cubloc works nice with mach3 doing analogue spindle speed and feed overrides.

Offline nik

*
  •  69 69
    • View Profile
Re: modbus schematic or similar
« Reply #2 on: November 12, 2008, 01:13:06 AM »
thanks for the links, but they are ready to use, there is no schematic diagram, i want to build one, i think pic18f4550 microcontroller will be fine, but will be waste of time to write new software, if somebody allready done this, so Im looking for open source project or something where i can use