Thanks for the response but I am not sure of exactly what I am doing. I have configured the pokeys device for input on pin 1, sent to the device. Then I bring the pokeys device to my Mach computer and plug it in to the USB. In ports and pins in mach I set OEM trigger1 on inputs to port 10, pin 1. I then configure the system hotkey for oem trigger 1 to Oem#1021(Reset). I wired a button to pin 1 on the pokeys board and the ground end of the switch to the GND on the pokeys board. When I press the button nothing happens. I pull up the pokeys menu in mach and it shows nothing. I have the pokeys devive enabled in the plugin. I must be doing something wrong but I have no idea what. Please Help.
Thanks,
Tom