Hello Guest it is April 18, 2024, 09:29:38 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Touch Screens  (Read 4856 times)

0 Members and 1 Guest are viewing this topic.

Offline Graham Waterworth

*
  • *
  • 2,672 2,672
  • Yorkshire Dales, England
    • View Profile
Touch Screens
« on: December 12, 2005, 07:44:59 PM »
Hi All,

can anybody tell me if Mach3 is compatable with touch screens, the one I have is a 15" with the touch output on the RS232.

I know I am all questions at the moment but things will change.

Thanks

Graham.
Logged
Without engineers the world stops

Art

*
Re: Touch Screens
« Reply #1 on: December 12, 2005, 07:54:40 PM »
Hi Graham:

  I know of severla using them. Usually, touch screen have a driver that reports touches as mouse clicks, therefore any program is compatable with them in that case.
Sometimes though, its best to make a screen whcih is a bit friendlier to the touchscreen, though from what Ive seen, the standard screens will work..

Art
Logged

Offline Brian Barker

*
  • *
  • 3,859 3,859
    • View Profile
Re: Touch Screens
« Reply #2 on: December 13, 2005, 10:05:42 AM »
I have one running here and the feed back for the screen is USB... Works GREAT!!!

Thanks
Brian
Logged
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

Offline mossman

*
  • 5 5
    • View Profile
Re: Touch Screens
« Reply #3 on: April 01, 2006, 02:32:35 PM »
Which screen are you using, any special programming? 

Thanks,

James
Logged

Offline Graham Waterworth

*
  • *
  • 2,672 2,672
  • Yorkshire Dales, England
    • View Profile
Re: Touch Screens
« Reply #4 on: April 02, 2006, 05:23:38 AM »
Hi,

I use a CTX touch 35, 15" part number PV500.

No special programming just plugged it in and everything worked.

Graham
Logged
Without engineers the world stops
Pages: 1   Go Up
« previous next »