You have the wrong impression of Wizards then....Unless My stupid brain is Still not seeing your issue...
You said you can change just a few lines of Code, in your G71/2/0 and rerun it.
In the Wizard it is the same thing, you just change the DRO value of the parameter you want to change and then repost it, it will spit out the new path.
ALSO:
The post above, in where I show you (IF you can custom edit how your post processor works), and your Bob Cad will post out the #Parameters that contain the values I need for the Macro, these same values you can ALSO hand edit at in the Program it self if you need to ).
OR: Perhaps I still dont fully understand the issue at hand. (Yes, I know you want G70's canned cycles added, but that will be a far, far, way off if ever...., when Brian says he doesnt have enough request for something he means, like 30% or more of the Total user population, to warrent the MASSIVE headache of ADDING/CHANGING code, and the PILE of New Support that will bring to him. He already does a huge number of hours per day).
So, Until or If it is ever added, I was just trying to see if "we" could do some kind of Work-a-round.
I want to be able to use the native cycles to for mass debulking of stock down to size, so let me know if that will work.
I will need you to do some Code for me from your Bob Cad so I can see how it post code.
Give me a singulur, G71, and then a G72, then a G71 with G70 finish, and G72 with Finish.
I will need also Straight and Contor examples of both.
See if you can edit your Bob Cad post your self on how it outputs stuff. If you can hand edit the post processor, then you are in biz!
Scott