Hello Guest it is September 19, 2019, 05:19:15 AM

Author Topic: ROUTER STOPPING DURING PROGRAM RUN  (Read 6367 times)

0 Members and 1 Guest are viewing this topic.

Offline jimpinder

*
  •  1,233 1,233
  • Wakefield, West Yorks, UK
    • View Profile
Re: ROUTER STOPPING DURING PROGRAM RUN
« Reply #10 on: August 02, 2008, 01:28:05 PM »
I agree- noise on the limit switch wires, or a faulty switch is the most probable cause -

If you are sure that you are nowhere near the limits with the program go to Config/Ports and Pins/ Inputs and cancel all the limit switch enables (you can leave the pin settings and keep the homes) and try a test run on that. If it works without stopping, then as Hood says, you have interference on the limit switch wiring.
Not me driving the engine - I'm better looking.
Re: ROUTER STOPPING DURING PROGRAM RUN
« Reply #11 on: August 02, 2008, 01:30:24 PM »
CAN SMALL SHEILDED WIRE BE PURCHASED AT PLACES LIKE RADIO SHACK?  HOOD, MAYBE YOU DON'T HAVE SUCH PLACES IN YOU COUNTRY..............

INIVATOR

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: ROUTER STOPPING DURING PROGRAM RUN
« Reply #12 on: August 02, 2008, 01:38:54 PM »
We have similar kinds of places but eBay is often a good place to get it, you can often find a whole coil for less than the price of a couple of feet from a store. Make sure the core is not solid, get multistrand or after a while the vibration of the machine will crack the core and you will have nightmares.
Hood
Re: ROUTER STOPPING DURING PROGRAM RUN
« Reply #13 on: August 02, 2008, 01:43:25 PM »
THANKS GUYS FOR THE HELP.  I WILL REPLACE THE WIRE WITH SHEILDED WIRE, AND HOPE THAT THAT SOLVES ALL MY PROBLEMS.

BOTH OF YOU GUYS, HOOD AND JIM, HAVE BEEN A GREAT HELP......

WHAT EVER YOU GET FOR PAY FOR SUPPORT, IT IS NOT ENOUGH......

I HOPE THAT THANKS FOR THE HELP WILL HELP..


INIVATOR FROM TEXAS......USA

Offline Kristin D

*
  •  203 203
  • Take that you LazyCam, next stop the glue factory!
    • View Profile
Re: ROUTER STOPPING DURING PROGRAM RUN
« Reply #14 on: August 02, 2008, 03:01:11 PM »
I got my shielded wire from allelectronics.com 22GA 5 conductor with a ground and foil shield was pretty cheap/foot. stock # 5CS22, I bought 100' but you can buy 1' to 500'

Kristin