Hello Guest it is September 15, 2019, 02:55:11 PM

Author Topic: Output Pin Problem  (Read 11579 times)

0 Members and 1 Guest are viewing this topic.

Offline budman68

*
  • *
  •  2,360 2,360
    • View Profile
Re: Output Pin Problem
« Reply #20 on: July 28, 2008, 02:06:26 PM »
Indeed, I'm reading up on it now (pdf manual online). Thanks for the heads up-

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline Vogavt

*
  •  258 258
    • View Profile
Re: Output Pin Problem
« Reply #21 on: July 28, 2008, 08:48:09 PM »
Have you tried a different cable?
No, but I will.

Checked the cable out with a continuity check. Each pin checks okay.
Checked the port on the board as well. Checks out okay from pin-holes to the soldered points on the board.
Tried moving the cable and the RS-232 on the board. Everything is rock solid.

Still can't get pin 1 to light up, nor 16.
« Last Edit: July 29, 2008, 11:54:22 PM by Vogavt »