Hi, Sage
LazyCam is lazy and still a Bata version.
You'll need to edit the G-code, Edit G-code Button will open the g-code to a text editor.
Put a ; in front of the ;G00 Z.1 within the pockets Only, It won't be seen when running the G-code file .
Or just take a brake and let the machine do it's Work.
Each Pocket will have repetitive code.
Prog. Start,
G00 Z.1
G00 X## Y## ; move to first pocket location.....
G01 Z-.01 ; first cut depth
G-code follows to end of first pass then you'll have a
;G00 Z.1 ;rapid hight Put a ; in front of the ;G00 Z.1
G01 Z-.02 ; second cut depth
G-code follows to end of second pass then you'll have a
;G00 Z.1 ;rapid hight Put a ; in front of the ;G00 Z.1
G01 Z-.01 ; third cut........this will continue till pocket is finished.
Then you'll have a,
G00 Z.1 ;rapid hight, Don't put one hear, your moving to the next pocket location
G00 X## Y## ; to next pocket to be cut.
G01 Z-.01 ; first cut depth
G-code follows to end of first pass then you'll have a
;G00 Z.1 ;rapid hight Put a ; in front of the ;G00 Z.1
G01 Z-.02 ; second cut depth
G-code follows to end of second pass then you'll have a
;G00 Z.1 ;rapid hight Put a ; in front of the ;G00 Z.1
G01 Z-.01 ; third cut........this will continue till pocket is finished.
and so-on.................
Hope this Helps, Chip