Hello Guest it is January 24, 2020, 06:42:28 AM

Author Topic: Mach3 no motors running  (Read 4912 times)

0 Members and 1 Guest are viewing this topic.

Re: Mach3 no motors running
« Reply #10 on: July 12, 2008, 01:47:26 PM »
The original problem was that the Port Pins and Dir Pins were interchanged...
Re: Mach3 no motors running
« Reply #11 on: July 12, 2008, 02:02:50 PM »
The Port Pins and Dir Pins were interchanged: X 3-2  Y 5-4 Z 7-6
Corrected" X2-3 Y-4-5 Z6-7