Hello Guest it is October 14, 2019, 02:40:40 AM

Author Topic: will this work  (Read 2172 times)

0 Members and 1 Guest are viewing this topic.

Offline bubba

*
  •  80 80
    • View Profile
will this work
« on: June 29, 2008, 02:24:01 AM »
Hi Guys,

This is my first visit.

I currently have a bridgeport series 1 cnc mill running with the following things. Have been using this setup for about 6 years.

Stepper motors from Pacific Scientific

wingcnc software from jraco (similar to Camsoft very stable, but very basic)

Pendant from jraco that works with galil

galil optima dmc 1740 isa card

Ahha 4 axis controller box  ( I had to integrate 2 Gecko g210 drives after 2 Ahha drives went bad and Ahha has closed its doors)
And by the way, the Gecko drives are far superior to the Ahha drives.

I am very interested in trying Mach3 or whatever Mach version is the best.

From your experience is Mach a stable software?

Should I continue to use the current Galil board? And if so why and how do I do it?

I know I am asking for much on my first post.

Thanks for any help.
Bubba

Offline Hood

*
  •  25,855 25,855
  • Carnoustie, Scotland
    • View Profile
Re: will this work
« Reply #1 on: June 29, 2008, 11:23:08 AM »
Mach is stable but afraid I cant say anything about the Galil as I have never had one.

Hood