Hello Guest it is November 07, 2024, 05:21:27 AM

Author Topic: Calibrating Issues  (Read 5117 times)

0 Members and 1 Guest are viewing this topic.

Calibrating Issues
« on: June 09, 2008, 12:22:13 PM »
I have resolved my issues. I have, after much hand wringing and woe be tie. got an accuracy of, ta ta,  0.0013 . I'd like to thank you all for your help and direction. I am very excited and raring to go. Thanks again guys.

Offline jimpinder

*
  •  1,232 1,232
  • Wakefield, West Yorks, UK
Re: Calibrating Issues
« Reply #1 on: June 09, 2008, 01:17:14 PM »
I don't want to pour cold water over your excitement, but if you are referring to the steps per unit (as in your old post), then unless your steps are very highly geared, you should get better than 1.3 thou.

As a matter of interest, what is you number of steps per thou. Mine, for example is 60,000 per inch, giving me a resolution better than 0.1 of a thou. Steps per inch is a fixed number which can be calculated, and not open to adjustment.
Not me driving the engine - I'm better looking.