Hello Guest it is December 12, 2019, 08:06:15 AM

Author Topic: Routing Wood  (Read 61050 times)

0 Members and 1 Guest are viewing this topic.

Offline Tweakie.CNC

*
  • *
  •  8,021 8,021
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Routing Wood
« Reply #90 on: January 11, 2009, 10:54:07 AM »
Hi Dave,

I assume you mean the pencil.

The tag is 'Trafolite', which is an engraving laminate - this one is white on the outside and black in the middle, you just engrave through the outer layer and bingo. Its available in all colors and color combinations. It must be known by a different trade name in the US.

Regards, Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline budman68

*
  • *
  •  2,360 2,360
    • View Profile
Re: Routing Wood
« Reply #91 on: January 11, 2009, 11:08:35 AM »
Oh, I see, it's a laminate engraving type material. Gotcha, that makes complete sense now.

It looked like it was all leveled on the surface, hence the reason I thought it was inlaid  ;)

Nice work-
Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline Tweakie.CNC

*
  • *
  •  8,021 8,021
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Routing Wood
« Reply #92 on: January 12, 2009, 08:26:15 AM »
This stuff is the other way round - black on the outside and white in the middle.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline budman68

*
  • *
  •  2,360 2,360
    • View Profile
Re: Routing Wood
« Reply #93 on: January 12, 2009, 02:23:00 PM »
lol, great sign, and yes, I'm very familiar with the stuff as use it quite often as well.

Dave

----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline Kent

*
  •  34 34
    • View Profile
Re: Routing Wood
« Reply #94 on: January 19, 2009, 10:18:16 PM »
OK I have been playing in the wood pile .... actually with Aspire  here is what I came up with

Offline Chaoticone

*
  • *
  •  5,633 5,633
  • Precision Chaos
    • View Profile
Re: Routing Wood
« Reply #95 on: January 19, 2009, 10:55:45 PM »
Great stuff here guys.  ;)

Tweakie, I have to make a sign like that. Stinking riot is what that is.  ;D

Love it,
Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline Tweakie.CNC

*
  • *
  •  8,021 8,021
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Routing Wood
« Reply #96 on: January 20, 2009, 03:08:55 AM »
As always - that's beautiful work Kent.


Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: Routing Wood
« Reply #97 on: August 23, 2009, 09:16:43 PM »
Seems I'm a little late in this post, but I'd like to get some pictures up.
The first is red oak, the second, pine

Offline Tweakie.CNC

*
  • *
  •  8,021 8,021
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Routing Wood
« Reply #98 on: August 24, 2009, 02:22:10 AM »
Nice work.
I love the CNC mallet in the background.  ;D

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: Routing Wood
« Reply #99 on: August 24, 2009, 11:05:59 AM »
when all else fails i turn to percussive maintenance :)