Hello Guest it is January 24, 2022, 06:50:28 PM

Author Topic: Boxford 160TCL  (Read 42843 times)

0 Members and 1 Guest are viewing this topic.

Offline SimonD

  •  143 143
    • View Profile
Re: Boxford 160TCL
« Reply #50 on: March 08, 2017, 03:19:31 PM »
I don't recall doing it as a matrix of buttons but may well have.... Many PLC's do allow that kind of input.
The CubLoc chip I used does have ModBus integrated which is how I got it to talk to Mach3

As for the rotary switch you can put a bunch of resistors across the poles of the switch to give you a stepped voltage depending on where the switch is rotated to. This can then be put into the PLC and decoded into a percentage and fed via ModBus.

The feedrate knob is a usefull addition but in all honesty is the only bit worth bothering with (apart from the e-stop!!)