Hello Guest it is August 19, 2019, 12:18:00 AM

Author Topic: Rapid movement problem  (Read 5643 times)

0 Members and 1 Guest are viewing this topic.

Offline Chip

*
  • *
  •  2,056 2,056
  • Gainesville Florida USA
    • View Profile
Re: Rapid movement problem
« Reply #10 on: April 08, 2008, 10:59:19 PM »
Hi, Chris64

What your looking for is a steady "Pulse Frequency" and pretty stable "Time in int" values.

The Buffer Load % is cpu load dealing with executing your G-code and Queue Depth is G-code Look-ahead.

Erratic/un-evenly spaced spikes in Driver Test are signes of issues, How do thy Look.

Thanks, Chip

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: Rapid movement problem
« Reply #11 on: April 09, 2008, 04:14:46 AM »
Quicktime is one of the programmes that really is not good with Mach, it is notorious for screwing things up.
Hood

Offline Sam

*
  • *
  •  988 988
    • View Profile
    • hillbillyhilton.com
Re: Rapid movement problem
« Reply #12 on: April 09, 2008, 06:07:14 PM »
Quote
it is notorious for screwing things up.
Thats an understatement if I ever read one, and mach is neither the beginning nor the end of things that QT screws up. QT="the devil"
« Last Edit: April 09, 2008, 06:09:30 PM by Sam »
"CONFIDENCE: it's the feeling you experience before you fully understand the situation."