Hello Guest it is April 21, 2019, 04:57:59 AM

Author Topic: X2 Mini Mill Profile not configured correctly  (Read 1997 times)

0 Members and 1 Guest are viewing this topic.

Offline Tyler

*
  •  10 10
    • View Profile
X2 Mini Mill Profile not configured correctly
« on: March 03, 2008, 01:43:48 PM »
We received our X2 mini Mill from SyilAmerica, but I don't believe the profile that we we were given is configured correctly. The X axis is the only thing I can jog or tune, and thusly I believe the control pins are configured incorrectly.

Edit2: the control box shows strange combinations when I jog.



There should be no activity in the "angle" indicators, as there is no motor control for that function on the X2. Also, when pressing "up" or "down" on the keyboard, it jogs the X axis away from the limit switch.

Does anyone know what could possibly be the problem here?

Edit3: I believe the problem is with the control box, it may be faulty. I'm getting a replacement and hopefully this fixes my problem.
« Last Edit: March 03, 2008, 03:01:00 PM by Tyler »