Hello Guest it is August 18, 2019, 01:26:58 AM

Author Topic: macropump help!  (Read 1737 times)

0 Members and 1 Guest are viewing this topic.

macropump help!
« on: February 29, 2008, 09:57:56 AM »
Hey, I have my machine running nicely so now want to play around with some things!

What I want is my X and Y axis to step by a set amount then stop (something which i can do!) when I press the CTRL key (hot key 1000) on the mach3 interface however i can not seem to get it to work!

Any examples people might be able to suggest?

Regards
eexdm2

Offline poppabear

*
  • *
  •  2,231 2,231
  • Briceville, TN, USA
    • View Profile
    • S S Systems, LLC
Re: macropump help!
« Reply #1 on: February 29, 2008, 11:54:00 AM »
you need to be more specific.

what are you trying to do? Use the control key to make BOTH X and Y step a set amound per push, or what.

scott
Commercial Mach3 & Mach 4, Design/Build/Retrofit CNC and Industrial machines.
http://www.ss-systems-llc.com/