Hello Guest it is April 19, 2019, 04:57:34 AM

Author Topic: New Router Screen  (Read 70047 times)

0 Members and 1 Guest are viewing this topic.

Offline Pythagoras

*
  •  83 83
  • a² + b² = c²
    • View Profile
Re: New Router Screen
« Reply #10 on: August 15, 2008, 10:26:38 PM »
Excellent !!! Thanks Scott.

Benny

The Pythagorean theorem: The sum of the areas of the two squares on the legs (a and b) equals the area of the square on the hypotenuse (c).     a² + b² = c².
Re: New Router Screen
« Reply #11 on: August 16, 2008, 02:21:54 AM »
I've tryied this screen on my router.
All work well until my bit brake.

There is no  "Run from here" to restart in middle of program.

Another thing, to find the good line to restart, i'm used to jog in the programme and look at tool path to reach when the bit has broken. But in this screen, we could not have both at a time.


To resume, it's a very good screen to use with a touch screen until bit breaking.

Offline ger21

*
  • *
  •  6,200 6,200
    • View Profile
    • The CNC Woodworker
Re: New Router Screen
« Reply #12 on: August 16, 2008, 09:08:11 AM »
There's a blank button that you could use for run from here. Just need to add a small DRO to enter the line number.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: New Router Screen
« Reply #13 on: February 11, 2011, 11:23:33 AM »
Here's a modified version of my other screen set for a single Z axis router.

 I haven't really tested it, but I think everything is working.

There is no toolpath on the Run screen. The reason for this is that CPU usage is about 75% lower without the toolpath on the screen, and when your cutting, you're usually looking at the machine, not the screen. This should make this screen run better on slower PC's than the standard screens.

Unzip all the .png files to Mach3\Bitmaps\Router\ and put the Router.set file in the mach3 folder. It's setup for spindle to use Output 1 and Coolant Output 2.

Let me know if there are any issues and I'll fix em up.

http://home.comcast.net/~cncwoodworker/CNC/Mach3/Screens/M3Router.zip

Also, here's the Real Draw Pro files if anyone wants to modify the Screens (you'll need RealDraw Pro).

http://home.comcast.net/~cncwoodworker/CNC/Mach3/Screens/M3Router_RealDraw_Pro.zip





So, how do I change from inches to mm in this screenset?

Offline ger21

*
  • *
  •  6,200 6,200
    • View Profile
    • The CNC Woodworker
Re: New Router Screen
« Reply #14 on: February 11, 2011, 11:48:11 AM »
Use the MDI, G21
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: New Router Screen
« Reply #15 on: February 18, 2012, 06:59:15 PM »
The pngs are too large for my screen (1024x728). Can I just re-size them?

Offline ger21

*
  • *
  •  6,200 6,200
    • View Profile
    • The CNC Woodworker
Re: New Router Screen
« Reply #16 on: February 19, 2012, 06:44:23 AM »
Just check Auto Screen Enlarge in General Config.
You can't resize them. The buttons won't be in the correct locations if you resize them.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline vav

*
  •  1 1
    • View Profile
Re: New Router Screen
« Reply #17 on: March 16, 2012, 12:45:15 PM »
in the screen "Run machine" does not coordinates count "A", but on the screen"settings" is OK. You can make update file? thx. Vav

Offline ger21

*
  • *
  •  6,200 6,200
    • View Profile
    • The CNC Woodworker
Re: New Router Screen
« Reply #18 on: March 17, 2012, 10:52:34 AM »
Try this one.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html