Hello Guest it is July 22, 2019, 04:56:49 AM

Author Topic: Contours of the footsteps don't closed  (Read 2314 times)

0 Members and 1 Guest are viewing this topic.

Contours of the footsteps don't closed
« on: January 18, 2008, 07:28:49 AM »
Hi to everybody. I use Mach3 to mill the printed circuits. Last give versions the contours of the footsteps they don't result closed well. How can I resolve the problem? Thanks in advance. Giordano

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: Contours of the footsteps don't closed
« Reply #1 on: January 18, 2008, 03:39:34 PM »
Can you try and explain a bit more of what you are meaning, maybe posting a screenshot?
Hood
Re: Contours of the footsteps don't closed
« Reply #2 on: January 19, 2008, 09:01:58 AM »
Hi. The problem is this: during the milling of the footsteps, the utensil a po lifts him before having finished the contour, that is before having reached the point of beginning of the milling. Excuse for mine bad English. Giordano